SAVE 5% OFF ORDERS OVER $199* WITH CODE:

TURKEY5
Menu
Complete Guide to 1973–1987 C10 & Blazer Dynacorn Restoration Sheet Metal

Complete Guide to 1973–1987 C10 & Blazer Dynacorn Restoration Sheet Metal

Posted on: November 11, 2026 in Installation Guides

Updated November 11, 2026

If you’re restoring a 1973–1987 Chevrolet C10, K5 Blazer, or GMC equivalent, Dynacorn and OER sheet metal are the go-to sources for body panels, structural metal, and trim that fits without major modification. This guide covers available C10 Blazer Dynacorn body panels and OER restoration parts, fitment by year range, and what to know before you order.

What C10 Blazer Dynacorn body panels and OER parts are available?

The 1973–1987 C/K truck and K5 Blazer generation is well-supported by OER’s restoration parts catalog, covering sheet metal components, grilles, inner fenders, dash bezels, and functional hardware. OER parts for this platform are GM-licensed where applicable and EDP-coated or finished to resist corrosion during storage and installation. Dynacorn major body panels for this generation ship from vendor warehouses and CBP carries the lowest prices on Dynacorn parts.

The table below maps key OER restoration parts to their fitment years across the C10, K5 Blazer, Suburban, and GMC equivalents.

Fitment and parts reference table

PartSKUFits (Years / Models)Finish / NotesPrice
Inner Fender Skirt, RHT70123-OER1975–1980 C10, C20, K10, K20, K5 Blazer; 1973–1980 C10 Suburban, GMC TruckEDP Coated$72.95
Instrument Dash Bezel w/ ACT14902-OER1981–1983 C10 Suburban, C20, K10, K20, K5 Blazer; GMC Jimmy, Suburban variants—$180.95
Instrument Dash Bezel w/ ACT14904-OER1984–1987 Chevrolet/GMC C10 Pickup, Blazer, Suburban—$203.95
Front Grille, Argent SilverT70043-OER1977–1979 C10, C20, K10, K20, K5 Blazer, Suburban (no emblem provision)Argent Silver; Oversize shipping$64.95
Front Grille, Custom BlackT70780-OER1977–1979 C10, C20, C30, K10, K20, K30, K5 Blazer, SuburbanBlack (no emblem provision)$71.95
Front Grille, Argent Silver w/ Center BarT70046-OER1981–1982 C10, C20, C30, K10, K20, K30, K5 Blazer, SuburbanArgent Silver Center Bar$70.95
Headlamp Bezel, Chrome LH (Rectangle lamps)T70067-OER1979–1980 C10, C20, C30, K10, K20, K30, K5 Blazer, Suburban; GMC variantsChrome; LH side$70.95
Vertical Grille Molding, LH or RHT71613-OER1985–1986 C10/C15/C20/C30, K10/K20/K30, K5 Blazer; 1987–1988 Blazer, R/V trucksHD Clip Design, Upper$34.95
Hood Latch Release Bracket, EDP Coated325300-OER1977–1980 C10 Suburban, C20, C30, K10, K20, K30, K5 Blazer; GMC equivalentsEDP Coated; Interior mount$51.95
Power Window Regulator, RHT70519-OER1977–1981 C10, C20, C30, K10, K20, K30, K5 Blazer, Suburban; GMC equivalents—$81.95
Headlamp Switch Knob & Shaft469302-OER1975–1984 C10 Suburban, C20, C30, K10, K20, K5 Blazer; GMC Jimmy; various vans—$34.95
Headlamp Switch Knob3996284-OER1975 C10, C20, C30, K5 Blazer; 1973–1974 GMC C15/C1500, K25/K2500—$27.95
Lower Ball Joint, 2WD10264-OER1975–1986 C10 Pickup; 1971–1986 C10 Suburban; 1975–1982 K5 Blazer RWD; GMC equivalents—$36.95

Always confirm fitment against the product page for your specific cab configuration, trim level, and option packages before ordering.

Inner fender and structural sheet metal

Structural sheet metal is where rust on these trucks causes the most trouble—inner fenders, floor sections, and cab corners absorb road spray and pack debris against the steel for decades. The 1973–1980 C10 inner fender skirt, RH, EDP coated is a direct example of OER’s approach to this problem: an electro-deposit primer coating applied before the part leaves the factory gives you a rust-inhibiting base layer that holds up during storage and through the gap between delivery and paint or seam sealer.

This fender skirt fits 1975–1980 C10, C20, K10, K20, and K5 Blazer, plus 1973–1980 C10 Suburban and GMC Truck applications. If you’re working the LH side or need a full floor pan section, check the fitment tab for your year—floor sections and cab corners for this platform are also available.

OER EDP-coated inner fender skirt for 1973-1980 Chevrolet C10 and K5 Blazer, right-hand side

Grille and front fascia panels

Front grilles are one of the highest-visibility panels on any C10 or K5 Blazer restoration. OER covers three distinct grille styles across the 1977–1982 range, and they don’t interchange between style years—order by your specific year and trim level.

The 1979–1980 trucks with rectangular headlamps use a separate headlamp bezel. The 1979–1980 C10 Blazer headlamp bezel, chrome LH fits the full C and K series including Suburban and GMC equivalents for those years.

For 1985–1988, the 1985–1988 C10 Blazer vertical grille molding, LH or RH uses a heavy-duty clip design and fits both early 1985–1986 C/K trucks and the redesignated 1987–1988 R/V and Blazer variants.

OER front grille argent silver with center bar for 1981-1982 Chevrolet C10 K5 Blazer and Suburban

Dash bezels and interior trim

Dash bezels crack, fade, and warp on trucks that have seen 40-plus years of heat cycles. OER produces two distinct dash bezels with AC provision to cover the early-1980s trucks:

  • 1981–1983: 1981–1983 C10 Blazer instrument dash bezel with AC — fits C10 Suburban, C20, C30, K10, K20, K5 Blazer, and all major GMC Jimmy and Suburban variants. $180.95.
  • 1984–1987: 1984–1987 C10 Blazer instrument dash bezel with AC — covers the mid-to-late run of the square-body generation. $203.95.

These two bezels do not interchange. The 1981–1983 unit will not fit a 1984+ truck dash, and vice versa. Confirm your model year before ordering.

Functional hardware: hood latch, window regulators, and switches

Panel work always uncovers failed hardware. These OER pieces are worth ordering alongside sheet metal so you’re not waiting on a second shipment mid-build:

  • Hood latch release bracket, EDP coated: The 1977–1980 C10 Blazer interior hood latch release bracket mounts inside the cab and receives the same EDP corrosion-resistant coating as the structural fender parts. Fits 1977–1980 C10 Suburban, C20, C30, K10, K20, K30, and K5 Blazer, plus GMC equivalents. $51.95.
  • Power window regulator, RH: The 1977–1981 C10 Blazer power window regulator, RH covers all C and K series plus K5 Blazer and Suburban for those years. $81.95.
  • Headlamp switch knob and shaft: The 1975–1984 C10 Blazer headlamp switch knob and shaft fits the full run of K5 Blazer, C10, C20, C30, K10, K20, and K30 from 1975 through 1984, plus GMC Jimmy and several van applications. $34.95.
OER instrument dash bezel with AC for 1981-1983 Chevrolet C10 K5 Blazer GMC Jimmy and Suburban

Installation notes for C10 and Blazer sheet metal

For general guidance on sheet metal installation practices for this era of GM trucks, the GM Factory Service Manual archive at Mortec is a useful reference for torque sequences, body alignment specs, and sealer locations specific to the square-body platform.

A few practical points that apply across this generation:

  • EDP-coated parts: Scuff EDP surfaces lightly before applying weld-thru primer or seam sealer at flanges. The coating is not designed to be welded through without prep.
  • Grilles and bezels: These are bolt-on replacements. Fit dry first to confirm clip alignment before snapping or torquing to final position.
  • Dash bezels: Disconnect the battery before removing the instrument cluster or adjacent trim to avoid shorts on aging wiring.
  • Inner fenders: Clean and treat the firewall and frame rail contact areas before final fitment—trapped moisture between new and old metal restarts the corrosion cycle.

Frequently asked questions

Do the 1977–1979 and 1981–1982 grilles interchange on C10 and K5 Blazer?

No. The 1977–1979 and 1981–1982 grilles are distinct parts with different mounting provisions. OER lists them under separate part numbers (T70043, T70780 for 1977–1979; T70046 for 1981–1982), and the year-specific fitment does not overlap.

Does the 1981–1983 dash bezel fit a 1984 C10 or Blazer?

No. The 1981–1983 dash bezel (T14902-OER) and the 1984–1987 dash bezel (T14904-OER) are separate parts. The 1984 model year marks the cutoff—order T14904-OER for any 1984–1987 truck.

What does EDP coating mean, and do I need to do anything before welding or painting?

EDP (electro-deposit primer) is a rust-inhibiting primer applied by submerging the part in a charged paint bath, which gives complete coverage including recesses. Before welding through or applying body sealer at flanges, lightly scuff the EDP surface for mechanical adhesion—the coating alone is not intended as a weld-thru primer.

Does the inner fender skirt (T70123-OER) fit both the 2WD and 4WD K5 Blazer?

The fitment list includes both C-series (2WD) and K-series (4WD) trucks, as well as the K5 Blazer from 1975–1980. Check the fitment tab on the product page for your specific configuration to confirm before ordering.

Is the headlamp switch knob the same part for 1975–1984, or are there differences within that range?

OER lists the headlamp switch knob and shaft (469302-OER) with a continuous fitment range of 1975–1984 across C10, K5 Blazer, and GMC Jimmy applications. For the earlier 1973–1975 trucks, the separate knob-only part (3996284-OER) applies to select 1975 C10, C20, C30, and K5 Blazer, and 1973–1974 GMC applications—confirm by year and model before ordering.

Can I order a floor pan or cab corner for my C10 at the same time as these OER parts?

Floor pans and cab corners for the 1973–1987 C10 and K5 Blazer are available separately. Use the fitment search on the product pages or browse by year and model to find the C10 floor pan or cab corner that matches your truck.

Related Articles

Pontiac Firebird

Understanding Firebird Body Panel Differences by Model Year

Restoring a Firebird is about more than just getting the car to look how it did when it rolled off […]

classic cars

Steps to Align and Install Classic Car Quarter Panels

Classic car quarter panels are not just big sheets of metal on the sides of a car. They help hold […]

Restoration Guide: 1967 C10 Short Bed Sheet Metal Replacement

If you’re tackling a 1967 C10 short bed sheet metal restoration, you already know the challenge: these trucks are beloved, […]